Project Spotlight · Lancaster, Ohio
Patio Bistro Lighting Installation in Lancaster, Ohio
Custom Bistro Lighting Installation for a New Concrete Patio
A new concrete patio gives you a great place to spend time outdoors, but once the sun goes down, the right lighting changes how the whole space feels. Instead of temporary posts, we built this homeowner a custom bistro lighting system with permanent light poles.
Patio Lighting: Before & After
Same patio, before and after the bistro lights went up. Drag the slider to compare.
New Concrete Patio in Lancaster, OH
Two custom steel poles, permanent footings, and bistro lights strung from the house.
How the Job Came Together
Plan, pour, fabricate, light it up.
-
Measure & Plan
Patio measured for string length and the two pole locations laid out.
-
Concrete Footings
Holes dug 24″ deep, Sonotube forms set, poured, and anchor bolts installed.
-
Custom Poles
2″ metal tubing with welded steel bases, primed, painted, and capped.
-
Lights On
Bistro lights strung between the house and poles for ambient light after dark.
Permanent Bistro Lighting Built for a New Patio
A homeowner in Lancaster, Ohio reached out looking for a way to add warm, ambient lighting over their new concrete patio. Rather than just hanging string lights off the house or using temporary posts, we designed and installed a custom patio bistro lighting system with permanent light poles.
The result is a clean, durable lighting setup that lights up the patio in the evening.
Measuring the Patio & Planning the Lighting
First we figured out how much lighting it would take to properly cover the patio. We measured the space for the right bistro light string length and planned the layout for consistent coverage without a lot of extra slack.
We also picked the best spots for two freestanding light poles, keeping them outside the main patio area so the layout is functional and looks clean.
Installing Permanent Light Pole Foundations
Both pole locations were marked and dug approximately 24 inches deep. A Sonotube concrete form went into each hole and was filled with concrete to give the poles a solid foundation.
Anchor bolts were set in the top of each footing as a secure connection point for the pole bases. That’s a lot more stable than driving a lightweight post into the ground.
At a Glance
Each pole got a square steel base welded to the bottom so it bolts right down to the anchor bolts in the footing. A cap on top keeps water out of the tubing and extends the life of the posts.
- Location
- Lancaster, Ohio
- Service
- Patio Bistro Lighting
- Poles
- 2 Custom Steel Poles
- Footings
- 24″ Concrete, Anchor Bolts
- Material
- 2″ Metal Tubing
Anchoring the Bistro Lights
With the poles set, we anchored additional mounting points to the house. The patio bistro lights were then strung between the house and the two freestanding poles, creating a suspended layout with even light across the whole outdoor entertaining area.
Ambient Outdoor Lighting for Evening Use
The homeowner now has warm, inviting ambient lighting that lets them use the patio well after sunset. Custom poles, permanent footings, and professionally installed string lights give it a finished look that fits the new patio, a dedicated lighting system instead of a temporary fix.
Light Your Space Without Relying on Existing Structures
Outdoor string lights are a simple way to transform a patio, deck, pergola, or outdoor entertaining area. On bigger spaces, though, the challenge is usually finding a way to hold the lights up without relying on what’s already there. Custom bistro light poles solve that and let you put the lighting exactly where you need it.
This Lancaster patio lighting project included custom metal fabrication, concrete footings, anchor bolts, exterior paint, house-mounted attachment points, and complete bistro light installation.
Looking for Patio Lighting Installation in Lancaster, OH?
If you’ve got a new patio, deck, pergola, or outdoor entertaining space that needs lighting, we’ll help design a setup that fits the space.
From patio bistro lights and outdoor string lights to custom light poles and mounting solutions, we build the lighting around your property and how you plan to use it.
Serving Lancaster & Surrounding Areas
Let’s Light Up Your Patio
Tell us about your patio, deck, or outdoor space and we’ll put together a lighting plan and a straightforward estimate.
Patio Lighting FAQs
Yes, for permanent lighting we run the electrical needed for poles, junction boxes, and switches. Plug-in string lights don’t need any electrical work.
Yes, bistro lighting and pole-mounted lighting can be added to an existing patio, deck, or yard without redoing the hardscape underneath.
Both: string or bistro lighting and permanent fixtures like sconces and post lights.
Most low-voltage and standard outdoor lighting doesn’t require a permit, but we’ll let you know if your specific project does.
Yes, we can wire lighting to a timer, photocell, or smart switch so it turns on and off automatically.
Want Lights Over the Patio?
Tell us about your space and how you’d like it lit.